The color of ceramics and tiles is one of the most important decorative elements that may change for some reason. Knowing these reasons is necessary to have a lasting decor. Ceramic tiles in building decoration are like a part of clothes! In addition to the attractiveness and beauty of the decoration, ceramic tiles are also responsible for strengthening it. Many factors should be considered when buying ceramic tiles; Factors such as tile and ceramic color. You must have encountered the correction of fading or changing the color of ceramic tiles.The paleness of the design, pattern and color of the tile is called its paleness, which sometimes occurs from the very beginning and sometimes after installation for some reasons. In addition to paleness, we see a change in color in some tiles and ceramics, which may lead to the darkening of the tile; This happens when the color change of some tiles compared to the rest of the tiles is visible.
What are the reasons for changing the color of ceramic tiles?
Ceramic tiles are among the most beautiful coverings used in interior and exterior decoration. The following factors are involved in changing the color of tiles and ceramics:
-
Thin glaze in ceramic tiles:
Tile glazing is one of the most important parts that make tiles and ceramics waterproof. The thicker this glaze is, the less water it absorbs from the surface, but thin layer glazes easily absorb water from the surface and change the color of ceramic tiles. To be sure of the glaze, just look at its thickness, you will notice the size and thickness of the glaze.
-
Patterned ceramic tiles:
Some tiles and ceramics have a special design and color, for which it was necessary to apply a thin layer of glaze over the design or to produce and install it without glaze at all; In this type of tiles, the color combination is more important, and these types of tiles are not suitable for high-traffic places, and they are mostly a decorative element that should be used with utmost care in their maintenance.
-
Massaging ceramic tiles:
Sometimes it is applied so much in cleaning ceramic tiles that a complete layer of mass covers the surface; This problem mostly happens in kitchens where the cooking oil is floating in the air, these oils sit on the surfaces and then absorb the dust in the air, which causes the ceramic color to change and the tiles to darken.
Reasons for ceramic color change
Among the most important reasons for changing the color of ceramics are the following:
-
Using inappropriate detergents and non-standard washing:
Improper detergent is one of the main killers of ceramic design and color. It is very important to pay attention to the fact that some qualities of ceramic tiles are less resistant to some chemicals. Because the use of acidic or alkaline detergents will cause the color of your ceramic to change forever and damage its shine and luster. As a result, be sure to research the suitable detergents for the ceramic tile you choose.
-
The cause of ceramic damping:
In fact, this happens due to the amount of water absorption. Tiles and ceramics are different in terms of texture density. The lower the density, the more pores the ceramic tile has, which fills up when exposed to water, and as a result, the ceramic becomes damp.
-
The cause of ceramic blackening:
One of the main reasons for the blackening of ceramics is the penetration of grout into its lower layers. Since the cement has a dark color, it causes the ceramic to become dark and even black.
Reasons for tile color change
Many reasons cause the color of the tile to change; But the main reasons will be the following:
-
Tile not being waterproof and using it in wet environments:
You can see the most color change of the tile in the bathroom. Because some people don’t pay attention to the waterproofness or the low water absorption level in the tile to choose the bathroom tile; As a result, ceramic tiles change color over time by absorbing water.
-
Excessive cleaning of tiles:
In cleaning, moderation should be observed. In addition, the tool you use to clean it should also be suitable. Because the rough tool over time causes scratches on the tile, which is one of the causes of color change in ceramic tiles.
-
Color change during installation:
Among the installed tiles and ceramics, there are seams whose diameter is between a few millimeters and one centimeter, and they are usually filled with bonding powder after the installation of the tile. If these joints are not filled well, after some time, water will penetrate under the tile and if the tile is not of good quality, it will cause its color to change.
The reasons for ceramic discoloration
Color change and paleness creates an ugly effect in the decoration, especially if it is too much in front of the eyes; As a result, you will have to change the ceramic, which will cost a lot. It is better to prevent this from happening than to treat it by changing the ceramic, which will cost you a lot of time and money. Ceramic color change happens in two ways:
-
Direct sunlight on ceramic tiles:
Some colors are damaged in the vicinity of sunlight; Colors like red. As a result, it is necessary to avoid using them in environments that you know will receive direct sunlight. Of course, this discoloration depends on the quality of ceramic tiles.
-
Waterproofing of ceramics before installation:
If floor ceramics are not wetted or sealed enough, especially before installation, the moisture in the cement or adhesive may be absorbed by the tile after installation and cause its color to change.
The method of detecting quality ceramics
The best way to recognize the ceramic grade is the appearance of the ceramics. Healthy ceramics that are completely flawless and there is no defect in its smooth, polished and glazed surface, and their edges are also completely flawless, are included in the group of first-class ceramics. If there are no more than one or two moles with a maximum diameter of half a milliliter, at a distance of two centimeters from all the edges of the polished and glazed surface of the ceramic, the desired ceramic is second grade. Another method of determining the grade of ceramics is to examine the edges of the ceramic glazed surface. If there is only one unglazed spot on all these sides, which has a maximum size of 2 to 3 mm, then the desired ceramic will be of second grade.
last word
As mentioned in this article, there are many reasons for changing the color of tiles and ceramics before and after installation, which you need to know. In this article, we talked about the care necessary to prevent the color of ceramic tiles from changing. With these methods, you will keep the beauty and charm of the interior decoration constant for a long time.
